Superior
Mineral coatings penetrate 1–3 mm into mineral substrates and form a permanent silicate bond rather than a separate synthetic film.
PRODUCT PRINCIPLES
In France we say that Paris was not built in a day. Jïnttema applies the same patience to coatings: research, test, learn, improve—and repeat. Health and safety come first, without giving up beauty or durability.
Mineral coatings penetrate 1–3 mm into mineral substrates and form a permanent silicate bond rather than a separate synthetic film.
A mineral formula based on silicates, mineral powder, auxiliaries and deionised water, with more than 96% total inorganic content.
Non-combustible mineral character, low alkalinity and a surface environment that resists mould and bacterial growth.
Inorganic pigments create stable, light-responsive colour with a service-life ambition of up to 15 years.
Natural mineral texture can be smooth, rough, brushed, sprayed, monochrome or layered—without masking the wall’s character.
A microporous structure supports air and moisture exchange, keeps walls drier and reduces dust attraction through antistatic behaviour.

>96% NATURAL INORGANIC CONTENT
In France we say that Paris was not built in a day. Jïnttema applies the same patience to coatings: research, test, learn, improve—and repeat. Health and safety come first, without giving up beauty or durability.
Mineral silicate bond
Synthetic surface film
Vapour permeable
Low-permeability film
Low-emission mineral formula supported by cited test reports
Potential VOC emissions
Surface dry in 60–80 minutes; minimum recoat interval 1 hour; extend below 25°C or above 60% RH
Typically 120–240 minutes; often one coat per day